Home> Products > Power Inverter > 12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type > 12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type (2U 2KVA)
12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type (2U 2KVA)

Model:

SPI-R2 series

Type:

IGBT / PWM Type

Capacity:

2KVA (2U)

Made in:

Taiwan, ROC

AC Power for Battery Emergency Lighting
ATS ETC
Automation Medical Equipment
Car Electrification  Railway Field
Civil and Military Nautical Telecom System


    
  
   
   

    
  
    
    

Clean,Highly Regulated Power Supply !
 
For Telecom:12 / 24 / 48Vdc DC Voltage.  
For Power Plant:110 / 220Vdc DC Voltage.  
1U  / 2U / 3U 19" or 23" Rack-mount  type.  
1U  / 2U / 3U 19" or 23" Open Frame Cabinet.  
Digital Displays.  
Pure Sine Wave Output (THD <3%) Resistive Load.  
Bypass Function.  
Advanced Microprocessor.  
Inverter mode / UPS mode (Option)  
Built-in Transfer Switch.  
Loading & Temperature Controlled Cooling Fan.  
Output Frequency : 50 / 60Hz Switch.  
Adjustable Output Voltage.  
Reliable Input Surge Protection & EMI Suppression.  
Modularized IGBT infrastructure to ensure better durability.  
Cold start function (DC start) functionality allows unit to operate with battery only.  
RS-232 Interface / Wire Connection to PC.  
Option: SNMP Interface / Dry Contacts / Remote Control.  
Protection : Input Under Voltage, Input Over Voltage, Overload, Short Circuit,   
  Low Battery Alarm, Over Temperature.  
CUSTOMIZATIONS WELCOME  

2U 19" Rack Mount Type (2KVA)

Model

A:110V

E: 220V

SPI-R2-

1202A

SPI-R2-

2402A

SPI-R2-

4802A

SPI-R2-

1102A

SPI-R2-

2202A

SPI-R2-

1202E

SPI-R2-

2402E

SPI-R2-

4802E

SPI-R2-

1102E

SPI-R2-

2202E

Outlook Rack Mount  19" 2U
Capacity Continuous O/P Power 2000W
Surge Rating 2300W @ 3 Minutes
2500W @ 3 Seconds
Peak 4000W
DC Input  I/P Voltage   12Vdc  24Vdc 48Vdc  110Vdc  220Vdc  12Vdc  24Vdc  48Vdc  110Vdc  220Vdc 
I/P Voltage Range  10-16Vdc 20-32Vdc 42-62Vdc 90-140Vdc  180-275Vdc  10-16Vdc 20-32Vdc 42-62Vdc 90-140Vdc  180-275Vdc 
Over Voltage Alarm  15.5Vdc 31.0Vdc 61.0Vdc 135.0Vdc 270.0Vdc 15.5Vdc 31.0Vdc 61.0Vdc 135.0Vdc 270.0Vdc 
Over Voltage Cut-off  16.0Vdc 32.0Vdc 62.0Vdc 140.0Vdc 275.0Vdc  16.0Vdc 32.0Vdc 62.0Vdc 140.0Vdc  275.0Vdc 
Under Voltage Alarm  10.5Vdc 21.0Vdc 43.0Vdc  95.0Vdc 185.0Vdc  10.5Vdc 21.0Vdc 43.0Vdc 95.0Vdc 185.0Vdc 
Under Voltage Cut-off  10.0Vdc 20.0Vdc 42.0Vdc  90.0Vdc 180.0Vdc   10.0Vdc 20.0Vdc 42.0Vdc 90.0Vdc 180.0Vdc 
Bypass (AC Input) Nominal Voltage     A: 1 Phase 2W+G, 110Vac (90V - 130Vac)      E: 1 Phase 2W+G, 220Vac (180V - 260Vac)
Frequency (50Hz - 60Hz) ± 3%       (50Hz - 60Hz) ± 3%
Protection Electronic Circuits & AC Circuit Breaker
Bypass Inverter ⇔ Bypass 4 - 6 ms
Inverter⇔Bypas Mode Inverter Mode or UPS Mode by Switch (Option)
AC Output AC Voltage Adjustment   A: 1Phase 2W+G, 100 - 120 Vac (Tune VR)   E: 1Phase 2W+G, 200 - 240 Vac (Tune VR)
Voltage Accuracy < 2% at Linear Load
Frequency 50Hz / 60Hz ± 0.05% (Switch Selectable)
Output Wave Form Pure Sine Wave, <3% THD @ Resistive Load
Output Power Factor 1.0 1.0
Peak Output Current 36A 18A
Efficiency @ Full Load   86%  88%  89%  94%  94%  87%  90%  92%  94%  94%
No Load Current  Draw 1.25A 0.56A 0.32A 0.38A 0.18A 1.79A 0.87A 0.40A 0.40A 0.20A
Protection Protection    Overload, Short Circuit, Reverse Polarity (Fuse), Input Under Voltage,
Input Over Voltage, Over Temperature 
Safety  EN60950-1
EMC FCC class A 

EN55022: 2006, Class A

EN61000-3 -2: 2006

EN 61000-3-3: 1995+A1:2001+A2-2005

Indicator Digital Display OVP, UVP, OTP, OLP, VAC, AMP, WATT, VDC, TEMP, Hz
Communication Interface Control Unit 

RS-232C with Baud Rate 2400, 4800, 9600, 19200 (Switch Selectable)

Option-1: SNMP Interface

Option-2: Dry Contact: OVP, UVP, OTP, OLP 
Remote Control Unit Optional Can't Support Optional Can't Support
Environment Operating Temperature -20°C ~ 50°C 
Storage Temp. Range -30°C ~ 70°C 
Relative Humidity 0~90%, non-condensing
Cooling Air Forced Fan Loading & Temperature Controlled Cooling Fan
Mechanical Dimension W424 * D435 * H88mm
Net Weight 12.8kgs

* All specifications mentioned above are subject to change without prior notice.

  

CUSTOMIZATIONS
HOT STANDBY
SNMP Interface
Dry Contacts
Remote Control
Introduction
 
12 / 24 / 48Vdc  19" or 23" Telecom Inverter, Rack-mount Type is designed for long “MTBF” 
and continue provide manageable and dependable AC power for network demands. 
Featuring an integrated utility bypass function, pure sine wave output and low EMI / RFI emissions,
SPI-R series Telecom Inverters are well equipped for Telecom and other demanding
critical applications.
 
An intelligent microprocessor-based control and smart software for power management
include alerts on the LED display interface that ensure safety and reliability.
A SNMP option is available; and would allow the user remote communication access
to the inverter. SPI-R Series Power Inverters are among the most reliable systems
available for electricity and other demanding critical applications.