● Home> Products > Power Inverter > 12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type > 12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type (2U 2KVA)
12 / 24 / 48Vdc Telecom Inverter, Rack-mount Type (2U 2KVA)
Model:
SPI-R2 series
Type:
IGBT / PWM Type
Capacity:
2KVA (2U)
Made in:
Taiwan, ROC
 |
 |
 |  |  |  |  |
| • | AC Power for Battery | • | Emergency Lighting |
| • | ATS | • | ETC |
| • | Automation | • | Medical Equipment |
| • | Car Electrification | • | Railway Field |
| • | Civil and Military Nautical | • | Telecom System |
| Clean,Highly Regulated Power Supply ! | ||
| • | For Telecom:12 / 24 / 48Vdc DC Voltage. | |
| • | For Power Plant:110 / 220Vdc DC Voltage. | |
| • | 1U / 2U / 3U 19" or 23" Rack-mount type. | |
| • | 1U / 2U / 3U 19" or 23" Open Frame Cabinet. | |
| • | Digital Displays. | |
| • | Pure Sine Wave Output (THD <3%) Resistive Load. | |
| • | Bypass Function. | |
| • | Advanced Microprocessor. | |
| • | Inverter mode / UPS mode (Option) | |
| • | Built-in Transfer Switch. | |
| • | Loading & Temperature Controlled Cooling Fan. | |
| • | Output Frequency : 50 / 60Hz Switch. | |
| • | Adjustable Output Voltage. | |
| • | Reliable Input Surge Protection & EMI Suppression. | |
| • | Modularized IGBT infrastructure to ensure better durability. | |
| • | Cold start function (DC start) functionality allows unit to operate with battery only. | |
| • | RS-232 Interface / Wire Connection to PC. | |
| • | Option: SNMP Interface / Dry Contacts / Remote Control. | |
| • | Protection : Input Under Voltage, Input Over Voltage, Overload, Short Circuit, | |
| Low Battery Alarm, Over Temperature. | ||
| • | CUSTOMIZATIONS WELCOME | |
|
2U 19" Rack Mount Type (2KVA) |
| Model |
A:110V E: 220V |
SPI-R2- 1202A |
SPI-R2- 2402A |
SPI-R2- 4802A |
SPI-R2- 1102A |
SPI-R2- 2202A |
SPI-R2- 1202E |
SPI-R2- 2402E |
SPI-R2- 4802E |
SPI-R2- 1102E |
SPI-R2- 2202E |
| Outlook | Rack Mount | 19" 2U | |||||||||
| Capacity | Continuous O/P Power | 2000W | |||||||||
| Surge Rating | 2300W @ 3 Minutes | ||||||||||
| 2500W @ 3 Seconds | |||||||||||
| Peak | 4000W | ||||||||||
| DC Input | I/P Voltage | 12Vdc | 24Vdc | 48Vdc | 110Vdc | 220Vdc | 12Vdc | 24Vdc | 48Vdc | 110Vdc | 220Vdc |
| I/P Voltage Range | 10-16Vdc | 20-32Vdc | 42-62Vdc | 90-140Vdc | 180-275Vdc | 10-16Vdc | 20-32Vdc | 42-62Vdc | 90-140Vdc | 180-275Vdc | |
| Over Voltage Alarm | 15.5Vdc | 31.0Vdc | 61.0Vdc | 135.0Vdc | 270.0Vdc | 15.5Vdc | 31.0Vdc | 61.0Vdc | 135.0Vdc | 270.0Vdc | |
| Over Voltage Cut-off | 16.0Vdc | 32.0Vdc | 62.0Vdc | 140.0Vdc | 275.0Vdc | 16.0Vdc | 32.0Vdc | 62.0Vdc | 140.0Vdc | 275.0Vdc | |
| Under Voltage Alarm | 10.5Vdc | 21.0Vdc | 43.0Vdc | 95.0Vdc | 185.0Vdc | 10.5Vdc | 21.0Vdc | 43.0Vdc | 95.0Vdc | 185.0Vdc | |
| Under Voltage Cut-off | 10.0Vdc | 20.0Vdc | 42.0Vdc | 90.0Vdc | 180.0Vdc | 10.0Vdc | 20.0Vdc | 42.0Vdc | 90.0Vdc | 180.0Vdc | |
| Bypass (AC Input) | Nominal Voltage | A: 1 Phase 2W+G, 110Vac (90V - 130Vac) | E: 1 Phase 2W+G, 220Vac (180V - 260Vac) | ||||||||
| Frequency | (50Hz - 60Hz) ± 3% | (50Hz - 60Hz) ± 3% | |||||||||
| Protection | Electronic Circuits & AC Circuit Breaker | ||||||||||
| Bypass | Inverter ⇔ Bypass | 4 - 6 ms | |||||||||
| Inverter⇔Bypas Mode | Inverter Mode or UPS Mode by Switch (Option) | ||||||||||
| AC Output | AC Voltage Adjustment | A: 1Phase 2W+G, 100 - 120 Vac (Tune VR) | E: 1Phase 2W+G, 200 - 240 Vac (Tune VR) | ||||||||
| Voltage Accuracy | < 2% at Linear Load | ||||||||||
| Frequency | 50Hz / 60Hz ± 0.05% (Switch Selectable) | ||||||||||
| Output Wave Form | Pure Sine Wave, <3% THD @ Resistive Load | ||||||||||
| Output Power Factor | 1.0 | 1.0 | |||||||||
| Peak Output Current | 36A | 18A | |||||||||
| Efficiency @ Full Load | 86% | 88% | 89% | 94% | 94% | 87% | 90% | 92% | 94% | 94% | |
| No Load Current Draw | 1.25A | 0.56A | 0.32A | 0.38A | 0.18A | 1.79A | 0.87A | 0.40A | 0.40A | 0.20A | |
| Protection | Protection | Overload, Short Circuit, Reverse Polarity (Fuse), Input Under Voltage, Input Over Voltage, Over Temperature |
|||||||||
| Safety | EN60950-1 | ||||||||||
| EMC | FCC class A |
EN55022: 2006, Class A EN61000-3 -2: 2006 EN 61000-3-3: 1995+A1:2001+A2-2005 |
|||||||||
| Indicator | Digital Display | OVP, UVP, OTP, OLP, VAC, AMP, WATT, VDC, TEMP, Hz | |||||||||
| Communication | Interface Control Unit |
RS-232C with Baud Rate 2400, 4800, 9600, 19200 (Switch Selectable) Option-1: SNMP Interface |
|||||||||
| Remote Control Unit | Optional | Can't Support | Optional | Can't Support | |||||||
| Environment | Operating Temperature | -20°C ~ 50°C | |||||||||
| Storage Temp. Range | -30°C ~ 70°C | ||||||||||
| Relative Humidity | 0~90%, non-condensing | ||||||||||
| Cooling | Air Forced Fan | Loading & Temperature Controlled Cooling Fan | |||||||||
| Mechanical | Dimension | W424 * D435 * H88mm | |||||||||
| Net Weight | 12.8kgs | ||||||||||
* All specifications mentioned above are subject to change without prior notice.
| ► | CUSTOMIZATIONS | |
| ► | HOT STANDBY | |
| ► | SNMP Interface | |
| ► | Dry Contacts | |
| ► | Remote Control | |
| Introduction |
| 12 / 24 / 48Vdc 19" or 23" Telecom Inverter, Rack-mount Type is designed for long “MTBF” |
| and continue provide manageable and dependable AC power for network demands. |
| Featuring an integrated utility bypass function, pure sine wave output and low EMI / RFI emissions, |
| SPI-R series Telecom Inverters are well equipped for Telecom and other demanding |
| critical applications. |
| An intelligent microprocessor-based control and smart software for power management |
| include alerts on the LED display interface that ensure safety and reliability. |
| A SNMP option is available; and would allow the user remote communication access |
| to the inverter. SPI-R Series Power Inverters are among the most reliable systems |
| available for electricity and other demanding critical applications. |
